Product Description
Product Description:
1. Flexspline is a hollow flanging standard cylinder structure.
2. There is a large-diameter hollow shaft hole in the middle of the cam of the wave generator. The internal design of the reducer has a support bearing.
3. It has a fully sealed structure and is easy to install. It is very suitable for occasions where the wire needs to be threaded from the center of the reducer.
Advantages:
1. High precision,high torque
2. Dedicated technical personnel can be on-the-go to provide design solutions
3. Factory direct sales fine workmanship durable quality assurance
4. Product quality issues have a one-year warranty time, can be returned for replacement or repair
Company profile:
HangZhou CHINAMFG Technology Co., Ltd. established in 2014, is committed to the R & D plant of high-precision transmission components. At present, the annual production capacity can reach 45000 sets of harmonic reducers. We firmly believe in quality first. All links from raw materials to finished products are strictly supervised and controlled, which provides a CHINAMFG foundation for product quality. Our products are sold all over the country and abroad.
The harmonic reducer and other high-precision transmission components were independently developed by the company. Our company spends 20% of its sales every year on the research and development of new technologies in the industry. There are 5 people in R & D.
Our advantage is as below:
1.7 years of marketing experience
2. 5-person R & D team to provide you with technical support
3. It is sold at home and abroad and exported to Turkey and Ireland
4. The product quality is guaranteed with a one-year warranty
5. Products can be customized
Strength factory:
Our plant has an entire campus The number of workshops is around 300 Whether it’s from the production of raw materials and the procurement of raw materials to the inspection of finished products, we’re doing it ourselves. There is a complete production system
HST-III Parameter:
| Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CHINAMFG torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
| NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
| 14 | 50 | 6.2 | 0.6 | 20.7 | 2.1 | 7.9 | 0.7 | 40.3 | 4.1 | 7000 | 3000 | ≤30 | 10000 |
| 80 | 9 | 0.9 | 27 | 2.7 | 12.7 | 1.3 | 54.1 | 5.5 | |||||
| 100 | 9 | 0.9 | 32 | 3.3 | 12.7 | 1.3 | 62.1 | 6.3 | |||||
| 17 | 50 | 18.4 | 1.9 | 39 | 4 | 29.9 | 3 | 80.5 | 8.2 | 6500 | 3000 | ≤30 | 15000 |
| 80 | 25.3 | 2.6 | 49.5 | 5 | 31 | 3.2 | 100.1 | 10.2 | |||||
| 100 | 27.6 | 2.8 | 62 | 6.3 | 45 | 4.6 | 124.2 | 12.7 | |||||
| 20 | 50 | 28.8 | 2.9 | 64.4 | 6.6 | 39 | 4 | 112.7 | 11.5 | 5600 | 3000 | ≤30 | 15000 |
| 80 | 39.1 | 4 | 85 | 8.8 | 54 | 5.5 | 146.1 | 14.9 | |||||
| 100 | 46 | 4.7 | 94.3 | 9.6 | 56 | 5.8 | 169.1 | 17.2 | |||||
| 120 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
| 160 | 46 | 4.7 | 100 | 10.2 | 56 | 5.8 | 169.1 | 17.2 | |||||
| 25 | 50 | 44.9 | 4.6 | 113 | 11.5 | 63 | 6.5 | 213.9 | 21.8 | 4800 | 3000 | ≤30 | 15000 |
| 80 | 72.5 | 7.4 | 158 | 16.1 | 100 | 10.2 | 293.3 | 29.9 | |||||
| 100 | 77.1 | 7.9 | 181 | 18.4 | 124 | 12.7 | 326.6 | 33.3 | |||||
| 120 | 77.1 | 7.9 | 192 | 19.6 | 124 | 12.7 | 349.6 | 35.6 | |||||
| 32 | 50 | 87.4 | 8.9 | 248 | 25.3 | 124 | 12.7 | 439 | 44.8 | 4000 | 3000 | ≤30 | 15000 |
| 80 | 135.7 | 13.8 | 350 | 35.6 | 192 | 19.6 | 653 | 66.6 | |||||
| 100 | 157.6 | 16.1 | 383 | 39.1 | 248 | 25.3 | 744 | 75.9 | |||||
| 40 | 100 | 308 | 37.2 | 660 | 67 | 432 | 44 | 1232 | 126.7 | 4000 | 3000 | ≤30 | 15000 |
HSG Parameter:
| Model | Speed ratio | Enter the rated torque at 2000r/min | Allowed CHINAMFG torque at start stop | The allowable maximum of the average load torque | Maximum torque is allowed in an instant | Allow the maximum speed to be entered | Average input speed is allowed | Back gap | design life | ||||
| NM | kgfm | NM | kgfm | NM | kgfm | NM | kgfm | r / min | r / min | Arc sec | Hour | ||
| 14 | 50 | 7 | 0.7 | 23 | 2.3 | 9 | 0.9 | 46 | 4.7 | 14000 | 8500 | ≤20 | 15000 |
| 80 | 10 | 1 | 30 | 3.1 | 14 | 1.4 | 61 | 6.2 | |||||
| 100 | 10 | 1 | 36 | 3.7 | 14 | 1.4 | 70 | 7.2 | |||||
| 17 | 50 | 21 | 2.1 | 44 | 4.5 | 34 | 3.4 | 91 | 9 | 10000 | 7300 | ≤20 | 20000 |
| 80 | 29 | 2.9 | 56 | 5.7 | 35 | 3.6 | 113 | 12 | |||||
| 100 | 31 | 3.2 | 70 | 7.2 | 51 | 5.2 | 143 | 15 | |||||
| 20 | 50 | 33 | 3.3 | 73 | 7.4 | 44 | 4.5 | 127 | 13 | 10000 | 6500 | ≤20 | 20000 |
| 80 | 44 | 4.5 | 96 | 9.8 | 61 | 6.2 | 165 | 17 | |||||
| 100 | 52 | 5.3 | 107 | 10.9 | 64 | 6.5 | 191 | 20 | |||||
| 120 | 52 | 5.3 | 113 | 11.5 | 64 | 6.5 | 191 | 20 | |||||
| 160 | 52 | 5.3 | 120 | 12.2 | 64 | 6.5 | 191 | 20 | |||||
| 25 | 50 | 51 | 5.2 | 127 | 13 | 72 | 7.3 | 242 | 25 | 7500 | 5600 | ≤20 | 20000 |
| 80 | 82 | 8.4 | 178 | 18 | 113 | 12 | 332 | 34 | |||||
| 100 | 87 | 8.9 | 204 | 21 | 140 | 14 | 369 | 38 | |||||
| 120 | 87 | 8.9 | 217 | 22 | 140 | 14 | 395 | 40 | |||||
| 32 | 50 | 99 | 10 | 281 | 29 | 140 | 14 | 497 | 51 | 7000 | 4800 | ≤20 | 20000 |
| 80 | 153 | 16 | 395 | 40 | 217 | 22 | 738 | 75 | |||||
| 100 | 178 | 18 | 433 | 44 | 281 | 29 | 841 | 86 | |||||
| 40 | 100 | 345 | 35 | 738 | 75 | 484 | 49 | 1400 | 143 | 5600 | 4000 | ≤20 | 20000 |
Exhibitions:
Application case:
FQA:
Q: What should I provide when I choose a gearbox/speed reducer?
A: The best way is to provide the motor drawing with parameters. Our engineer will check and recommend the most suitable gearbox model for your reference.
Or you can also provide the below specification as well:
1) Type, model, and torque.
2) Ratio or output speed
3) Working condition and connection method
4) Quality and installed machine name
5) Input mode and input speed
6) Motor brand model or flange and motor shaft size
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery, Hst-I |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | 90 Degree |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
| Samples: |
US$ 100/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Steps to Replace a Faulty Gearbox in an Automobile
Replacing a faulty gearbox in an automobile is a complex task that requires proper tools, skills, and safety precautions. Here are the general steps involved in the process:
- Prepare the Vehicle: Park the vehicle on a flat surface and engage the parking brake. Disconnect the battery to ensure safety during the procedure.
- Drain Fluids: Drain the transmission fluid from the old gearbox into a suitable container.
- Disconnect Components: Remove any components obstructing access to the gearbox, such as the driveshaft, exhaust system, and linkage.
- Suspend the Engine: If necessary, use an engine hoist or support to suspend the engine safely.
- Support the Gearbox: Use a transmission jack to support the weight of the gearbox.
- Remove Gearbox: Detach the gearbox from the engine by removing bolts and disconnecting the clutch or torque converter.
- Install New Gearbox: Position the new gearbox onto the engine and secure it in place with bolts.
- Reconnect Components: Reattach the driveshaft, exhaust system, and linkage that were disconnected earlier.
- Refill Fluids: Fill the new gearbox with the appropriate transmission fluid according to the manufacturer’s specifications.
- Lower Engine: Carefully lower the engine back into its original position if it was suspended.
- Test and Adjust: Start the vehicle and test the new gearbox for proper operation. Check for any leaks, unusual noises, or gear shifting issues.
- Final Check: Double-check all connections and ensure that all components are properly secured.
- Dispose of Old Fluid: Dispose of the old transmission fluid safely and responsibly.
- Dispose of Old Gearbox: Properly dispose of the old gearbox according to local regulations.
It’s important to note that gearbox replacement can vary significantly depending on the vehicle’s make and model. It’s recommended to consult the vehicle’s service manual or seek professional assistance if you’re not experienced in automotive repair.
editor by CX 2024-05-16
China Custom Bus Coach Automatic Hydromechanical Gearbox 6HP604c for Bredamenarinibus Man Vest Solbus Setra CZPT CZPT CZPT Dragon best automatic gearbox
Product Description
| Number | 6HP 504 C |
| Gearbox Type | Automatic |
| Gears | 6 |
| Retarder | Yes |
| Name | Automatic hydromechanical gearbox |
| Main components | torque converter / six-speed planetary gearbox with automatic control |
| Net weight | 356 kg |
| Maximum torque | 1100 N · m |
| Applicable to | for bus |
| Gear ratios | |||||||
| Transmission Number | 1 | 2 | 3 | 4 | 5 | 6 | R |
| Gear ratios | 3,43 | 2,01 | 1,42 | 1,00 | 0,83 | 0,59 | 4,84 |
Transmission assemblies include ZF, CHINAMFG Fuller, FAST, Allison, Xihu (West Lake) Dis.feng, Mercedes-Benz, Volvo, HOWO, WLY and other brands. Used in trucks, buses, excavators, tractors and many other fields. Transmission parts include gears, synchronizers, input/output shafts, countershafts, bearings, power take-offs, boosters, housings, shift mechanisms, sensors, wiring harnesses, repair kits, transmission diagnostic tools, and transmission control systems. . . etc.
Shiyan Yongliwei Industry and Trade Co., Ltd. is a reliable company integrating the design, development, production and sales of transmission assemblies and parts. Our products have been exported to more than 50 countries and regions including Russia, Italy, Indonesia, South Africa, Zambia, Iran, Kazakhstan, Iraq, Armenia, Philippines, South Korea, Ecuador, Australia, and New Zealand, and have been unanimously recognized by customers.
3 large warehouses of 8000 square meters. —– Rich brands, numerous models, and sufficient inventory.
Close cooperation with international logistics companies such as CHINAMFG transportation, railway transportation, express transportation, DHL/UPS/FEDEX express transportation. —– Diverse choices, stable and efficient.
A number of professional gearbox technicians provide technical support and have received official training from ZF and others. Accurate information reduces buying wrong goods or communication problems.
EXW, FOB, CIF…DDP and other trade methods are supported. —– Transaction links are complete and clear, and services are guaranteed.
Regularly participates in various large-scale international auto parts exhibitions. Can meet with partners and provide door-to-door service.
Robust and diverse packaging:
Plastic bags/foam+cartons and wooden boxes, also can be packed according to customer requirements.
Support product customization, and also can customize outer packaging/laser engraved label models, etc.
Provide you with convenient, fast and low-cost e-commerce one-stop services:
AAccepts TT/Western Union/Credit Card/PayPal and other payment methods and various currencies. Also accepted are USD, HKD, AUD, CAD, CNY, CHF, DKK, EUR, GBP, JPY, NOK, NZD, SEK, and SGD. Yuan, ZAR South African Rand, etc. . Local payment methods.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Machinery, Truck |
|---|---|
| Function: | Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase |
| Layout: | Hydromechanical Gearbox |
| Hardness: | Hardened Tooth Surface |
| Installation: | Torque Arm Type |
| Step: | 6 |
| Customization: |
Available
| Customized Request |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2024-05-07
China high quality Heavy Truck Accessories CZPT CZPT Gearbox High-Grade Cone Hub automatic gearbox
Product Description
Auto Spare Heavy Truck Part CHINAMFG CHINAMFG CHINAMFG CHINAMFG CHINAMFG Xihu (West Lake) Dis.feng gearbox High grade cone hub
| Model NO. | 1269357171 | Condition | New |
| Item | Cone hub | Hscode | 8708457100 |
| Car Fitment | Euro &CHINA Series, Cone hub | Delivery Time | 5-30days, or According to Order Qty |
| Quotation Term | Fob, CIF, C&F, EXW | Quality | 100%Tested |
| Model | Euro &CHINA Series, Synchronizer Ring | OE No | 1269357171 |
| Truck Model | European&Chinese Truck | Application | Gearbox Parts |
| Price | Negotiation | Package Type | Always According to Customer Requirements |
| Transport Package | Box | Size | Standard Size |
1. who are we?
We are based in ZheJiang , China, start from 2013,sell to Mid East(50.00%),Eastern Europe(20.00%),Eastern Asia(10.00%),South America(7.00%),Southeast Asia(5.00%),Africa(4.00%),North America(3.00%),Domestic Market(00.00%). There are total about 11-50 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Heavy Truck Parts and Construction Machinery Parts/Filter/Turbocharger/Clutch Disc/Clutch Cover/Water Pump/Truck Chassis Parts
ZheJiang Lixu International Trading Co., Ltd, is a reputed manufacturer and exporter of construction machines, farm machines and mine machines with large years’ experience.Located in the capital city HangZhou of ZheJiang province, the company has developed into a comprehensive machinery group.
The products mainly include:Wheel loader, excavator, backhoe loader, skid steer loader, forklift, self-loading concrete mixer and mucking loader etc.Which are widely used in construction, farming, mining and all the related machinery areas.
Also we have spare parts for constraction machine, like , Komastu, Hitachi,HOWO, Hyundai, Doosan,etc. Original and OEM products.
Besides domestic market, the products have also been supplied to numerous places all over the world which has earned large reputation and enjoyed great population.
Since established, the company has been devoted to the scientific and technological innovation, precision manufacturing and all-around service.With all the related certificates, we strictly follow the industry standard, fully control the production flow guaranteeing high quality of every product.We sincerely welcome your visit to reach a mutual success.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Contact The Merchant |
|---|---|
| Warranty: | Contact The Merchant |
| Type: | Gearbox, Auto Bumper |
| Material: | Plastic |
| Brand Name: | HOWO |
| Model: | HOWO |
| Customization: |
Available
| Customized Request |
|---|
Is it Better to Repair or Replace a Damaged Gearbox?
Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:
- Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
- Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
- Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
- Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
- Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
- Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
- Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.
Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.
editor by CX 2024-04-24
China Professional CZPT Ec210 Rotary Gearbox Gear Bearing Excavator Spare Parts Motor Transmission Gearbox Swing Motor automatic gearbox
Product Description
Our Advantage
1.Quick response within 12 hours
2.Accept small order(MOQ:1pcs)
3.Custom service.Unusual packaging,standard packing or as customer required
4.Excellent after-sales service
5.Strict quality control system.100% factory testing and inspection personnel in accordance with international standards for the high-frequency sampling, to ensure the quality of products manufacture d
6.Accept ODM&OEM
| Reducer Model | Applicable Machine Model | Motor Install Hole | Housing Install Hole | Shaft Pinion Gear Diameter | Shaft Pinion Gear Height | Shaft Pinion No. Teeth | Weight/kg | ||
| A | B | C | H | Z | |||||
| GS11A05 | SDLG6205-6210Rotary | φ282 | 8-M14 | φ360 | 11-φ22 | φ194 | 91 | 25 | 144.47 |
| GS11A06 | Hyundai215vs Rotary | φ224 | 4-M16 | φ360 | 11-φ22 | φ194 | 88 | 25 | 154.42 |
| GS11A09 | Yuchai230 Rotary | φ224 | 4-M16 | φ360 | 10-φ22 | φ192 | 94 | 25 | 154.25 |
| GS11A08 | Yuchai21Ton Rotary | φ282 | 8-M14 | φ360 | 10-φ22 | φ192 | 94 | 13 | 145.38 |
| GS11A02 | Cheryl20Ton Rotary | φ282 | 8-M14 | φ360 | 10-φ22 | φ192 | 94 | 13 | 145.25 |
| GS11A10 | XCMGXE210 Rotary | φ224 | 4-M16 | φ360 | 10-φ22 | φ192 | 94 | 13 | 155.72 |
Product Parameters
| EXCAVATOR | MODELS | |||||
| CATERPILLA*R | E70 | E70B | E70B-7 | E70C | E120 | E140B |
| E200B | E240 | E240B | E300B | E305 | E311 | |
| E312 | E312B | E312C | E315 | E315B | E315C | |
| E325 | E325B | E330 | E330B | E330C | E340B | |
| E450 | ||||||
| PC SERIES | PC45 | PC50 | PC50-2 | PC50-5 | PC55 | PC90 |
| PC60 | PC60-2 | PC60-3 | PC60-5 | PC60-6 | PC60-7 | |
| PC100 | PC100-3 | PC100-5 | PC100-6 | PC150 | PC150-3 | |
| PC120 | PC120-3 | PC120-5 | PC120-6 | PC150-5 | ||
| PC200-1 | PC200-2 | PC200-3 | PC200-5 | PC200-6 | PC200-7 | |
| PC220-1 | PC220-3 | PC220-5 | PC220-7 | PC75 | PC80 | |
| PC300-3 | PC300-5 | PC300-6 | PC300-7 | |||
| PC400 | PC400-3 | PC400-6 | PC450 | PC450-6 | ||
| HITACHI– | EX60-1 | EX60-2 | EX60-3 | EX60-5 | EX60-6 | EX70 |
| EX100 | EX100-2 | EX80-5 | EX135 | EX160-1 | ||
| EX120 | EX120-2 | EX120-5 | EX120-6 | EX120-7 | ||
| EX200-1 | EX200-2 | EX200-3 | EX200-5 | EX200-6 | EX210-1 | |
| EX220-1 | EX220-2 | EX220-3 | EX220-5 | EX220-6 | EX270 | |
| EX300-1 | EX300-2 | EX300-3 | EX300-5 | EX330 | ||
| EX400 | EX400-3 | EX450 | EX450-5 | EX500-3 | ||
| ZX55 | ZX120 | ZX200 | ZX230 | |||
| UH04 | UH07-5 | UH07-7 | UH160 | KH120-2 | ||
| KATO | HD55 | HD100 | HD140 | HD140-3 | ||
| HD250 | HD250-1 | HD250-2 | HD250G | HD250-7 | ||
| HD300 | HD307 | HD400 | HD400-2 | HD400-5 | HD400-7 | |
| HD450 | HD450-2 | HD450-7 | HD450SE | HD400SEM | ||
| HD550 | HD550-2 | HD550-3 | HD550-5 | HD550-7 | ||
| HD700-2 | HD700-5 | HD700-7 | HD770-1 | HD770-2 | ||
| HD800-1 | HD800-2 | HD800-5 | HD800-7 | HD820 | ||
| HD880-1 | HD880-2 | HD880-5 | HD900-5 | HD900-7 | HD1880-1 | |
| HD1220 | HD1250 | HD1250-5 | HD1250-7 | HD120-7(6D102) | ||
| KOBELCO | SK09 | SK50 | SK55 | SK130 | SK135 | SK160 |
| SK60 | SK60-3 | SK60-6 | SK60-7 | SK70-6 | SK55 | |
| SK100-1 | SK100-3 | SK100-5 | SK120 | SK120-3 | SK120-5 | |
| SK200-1 | SK200-2 | SK200-3 | SK200-5 | SK200-6 | SK200-6E | |
| SK200-7 | SK210-6 | SK220-1 | SK220-3 | SK230 | SK230-6E | |
| SK230-8 | SK260 | SK300 | SK310 | SK310-3 | SK330 | |
| SK330-8 | SK450-1 | |||||
| SUMITOMO | SH30 | SH40 | SH60 | SH75 | SH100 | SH130 |
| SH120 | SH120A1 | SH120-3 | SH120-6 | SH120A3 | ||
| SH200 | SH200A1 | SH200A3 | SH220 | SH260 | SH265 | |
| SH280 | SH280DJ | SH280EJ | SH280F2 | SH280FG-2 | SH280FG | |
| SH300 | SH340 | SH340EJ | SH340F1 | SH340F2 | SH350 | |
| SH160 | SH160-2 | SH430 | SH430FJ | LS280 | SH915 | |
| HYUNDAI | R55 | R60 | R80-8 | R130 | R170 | R180 |
| R200 | R200-5 | R210 | R210-3 | R210-5 | ||
| R220 | R220-5 | R300 | R250 | R250-5 | ||
| R305-7 | R310 | R320-7 | R335-7 | |||
| DAEWOO | DH55 | DH60 | DH60-5 | DH200-5 | ||
| DH220-2 | DH220-3 | DH220-5 | DH225-7 | DH250-7 | DH220-7 | |
| DH258-7 | DH280 | DH300 | ||||
FAQ
1: When will ship my order ?
Once we get confirmation of payment, we will try the best to ship order within 24 hours
2: How long to prepared the goods?
We have many stock for each iterm. so dont woride .we have enought stock for u
3: Which shipment you can supply?
By sea, by air or by express (DHL, FEDEX ,TNT,UPS,EMS)
4.How long does it take to clients address ?
The normal delivery time is 4-5 days .depending 1 which country u are in
5.How can i know my order it already shipping ?
When the goods shipping , i will email u for tracking number for goods. if by sea or by air , i can offer bill of lading to u
6.If i was not satisfied with the products, can i return goods ?
Yes . we offer exchanged and repair serve in the warranty time . please /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Online Support |
|---|---|
| Warranty: | 6 Months |
| Type: | Rotary Gearbox |
| Application: | Excavator |
| Certification: | CE |
| Condition: | New |
| Samples: |
US$ 56/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
| Customized Request |
|---|
Can I Use Synthetic Oil in My Gearbox?
Yes, you can use synthetic oil in your gearbox, and in many cases, it can offer several advantages over conventional mineral-based oils:
- Improved Temperature Stability: Synthetic oils typically have a higher resistance to thermal breakdown, making them suitable for gearboxes that operate at high temperatures.
- Enhanced Lubrication: Synthetic oils often have superior lubrication properties, providing better protection against friction, wear, and component damage.
- Extended Oil Change Intervals: Synthetic oils can often withstand longer operating periods without losing their effectiveness, reducing the frequency of oil changes and maintenance.
- Reduced Viscosity Changes: Synthetic oils are less prone to viscosity changes at different temperatures, ensuring consistent lubrication performance in varying conditions.
- Lower Friction and Energy Loss: The smoother molecular structure of synthetic oils can lead to reduced internal friction, potentially improving gearbox efficiency and performance.
- Cold Weather Performance: Synthetic oils generally flow better at low temperatures, making them suitable for gearboxes operating in cold climates.
- Protection Against Oxidation: Synthetic oils often have better resistance to oxidation, helping to prevent the formation of sludge and deposits that can impact gearbox performance.
However, before switching to synthetic oil, it’s important to consider the manufacturer’s recommendations and specifications for your specific gearbox model. Some gearboxes may have specific requirements or restrictions on the type of lubricant to use. If the manufacturer approves the use of synthetic oil, it can be a beneficial choice, but if not, sticking to the recommended oil type is crucial to ensure proper gearbox function and warranty coverage.
editor by CX 2024-04-10
China factory RF Series Coaxial Gearbox with Servo Motor with Flange Connection automatic gearbox
Product Description
RF Series Coaxial Gearbox with Servo Motor with Flange Connection
RF Series reducers are designed and manufactured on the basis of modular combination system.
Product Description
Small size, light weight, large transmission torque, superior performance, stable operation, low noise, durable, can be installed in a variety of ways, can be matched with different types of motors, a wide range of applications. sewage treatment, chemical industry, pharmacy and other industries.
There are a lot of motor combinations, installation forms and structural schemes. The transmission ratio is classified and fine to meet different operating conditions, and the performance is superior.
Reinforced high rigid cast iron box; The hardened gear is made of high-quality alloy steel. Its surface is carburized, quenched and hardened, and the gear is finely ground. It has stable transmission, low noise, and large bearing capacity. Low temperature rise, long service life. It is widely used in metallurgy,1. Features: small offset output, compact structure, maximum use of box space, use of integral casting box, good stiffness, can improve the strength of the shaft and bearing life.
1.Technical data:
| Product Name | RF Series Coaxial Gearbox with Servo Motor with Flange Connection |
| Gear material | 20CrMnTi alloy steel |
| Color | Blue Silver Customerized |
| Case Material | Cast iron HT200 |
| Gear Processing | Grinding finish by HOFLER Grinding Machines |
| Noise Test | Below 65dB |
| Brand of bearings | C&U bearing, ZWZ,LYC, HRB, CHINAMFG ,etc |
| Brand of oil seal | NAK or other brand |
| Temp. rise (MAX) | 40ºC |
| Temp. rise (Oil)(MAX | 50ºC |
| Vibration | ≤20µm |
| Housing hardness | HBS190-240 |
| Surface hardness of gears | HRC58°~62 ° |
| Gear core hardness | HRC33~40 |
| Machining precision of gears | 5 Grade |
| Lubricating oil | GB L-CKC220-460, Shell Omala220-460 |
| Heat treatment | Carburizing, Quenching etc |
| Efficiency | 95%~96% (depends on the transmission stage) |
| Backlash | ≤20Arcmin |
2. Installation type and output mode:
bottom seated type and large and small flange type installation, CHINAMFG shaft output.
3. Input mode:
direct motor, shaft input and connecting flange input.
4. Reduction ratio:
single <5,secondary 5~24.8, tertiary 27.2~264, R/R combination up to 18125.
5. Average efficiency:
Class II 96%, Class III 95%, R/R combination 85%.
6.Technical parameters:
Coaxial output
Power: 0.12KW~160KW
Torque: 1.4N · m ~ 23200N · m
Output speed: 0.06 ~ 1090r/min
7. Model of R series reducer:
RF37, 47, 57, 67, 77, 87, 97, 107,137, 147, 167,177
Detailed Photos
Certifications
Packaging & Shipping
Installation Instructions
Company Profile
< ABOUT TILI
< WORKSHOP
< QUALITY CONTROL
FAQ
Q 1: Are you a trading company or a manufacturer?
A: We are a professional manufacturer specializing in manufacturing various series of reducer.
Q 2:Can you do OEM?
A:Yes, we can. We can do OEM for all the customers .if you want to order NON-STANDERD speed reducers,pls provide Drafts, Dimensions, Pictures and Samples if possible.
Q 3: How long is your warranty?
A: Our Warranty is 12 months under normal circumstances.
Q 4: Do you have inspection procedures for reducer?
A:100% self-inspection before packing.
Q 5: Can I have a visit to your factory before the order?
A: Sure, welcome to visit our factory.
Q 6:How to choose a gearbox? What if I don’t know which gear reducer I need?
A:You can refer to our catalogue to choose the gearbox or we can help to choose when you provide,the technical information of required output torque, output speed and motor parameter etc. Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q 7: What information shall we give before placing a purchase order?
A:a) Type of the gearbox, Size , Transmission Ratio, input and output type, input flange, mounting position, motor information and shaft deflection etc. b)Housing color.c) Purchase quantity. d) Other special requirements
Q 8:What is the payment term?
A:You can pay via T/T(30% in advance as deposit before production +70% before delivery
/* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Marine, Agricultural Machinery, Chemical |
|---|---|
| Function: | Distribution Power, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction |
| Layout: | Coaxial |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
| Customization: |
Available
| Customized Request |
|---|
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2024-01-09
China high quality Advance Marine Gearbox Hcw800 Is Suitable for Fishing and Boats. best automatic gearbox
Product Description
Advance Marine Gearbox HCW800 is suitable for fishing, tug and various engineering boats.
Marine Gearbox HCW800 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and three-stage transmission, featuring in compact structure, extra large ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 1500-1900r/min | ||
| Reduction ratio | 12.584,13.244 | Trans. capacity | 0.73kw/r/min |
| 13.945 | 0.7kw/r/min | ||
| 14.68 | 0.68kw/r/min | ||
| 15.46 | 0.66kw/r/min | ||
| 15.915 | 0.64kw/r/min | ||
| 16.285 | 0.61kw/r/min | ||
| 17.16,17.696 | 0.57kw/r/min | ||
| 18.267 | 0.55kw/r/min | ||
| 19.078 | 0.53kw/r/min | ||
| 19.714,20.13 | 0.5kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 240KN | ||
| Center distance | 570mm | ||
| L×W×H | 1371x1560x1910mm | ||
| Net weight | 3800kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HCW1100 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and three-stage transmission, featuring in compact structure, extra large ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 1500-1800r/min | ||
| Reduction ratio | 15.882 | Trans. capacity | 0.931kw/r/min |
| 16.546 | 0.931kw/r/min | ||
| 17.243 | 0.894kw/r/min | ||
| 17.973 | 0.857kw/r/min | ||
| 18.740 | 0.822kw/r/min | ||
| 19.547 | 0.788kw/r/min | ||
| 20.395 | 0.756kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 300KN | ||
| Center distance | 625mm | ||
| L×W×H | 1143x1630x2550mm | ||
| Net weight | 6000kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HCT800 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact structure, larger ratio, higher loading capacity and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 4.95,5.57,5.68,5.93,6.43 | Trans. capacity | 0.625kw/r/min |
| 6.86 | 0.588kw/r/min | ||
| 7.33 | 0.551kw/r/min | ||
| 7.84 | 0.515kw/r/min | ||
| 8.40 | 0.480kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 450mm | ||
| L×W×H | 1056×1280×1425mm | ||
| Net weight | 2700kg | ||
| Flywheel | SAE21,18,16 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCT800/3 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact structure, larger ratio, higher loading capacity and convenient in dis- and reassembly and maintenance.
| Input speed | 800-1800r/min | ||
| Reduction ratio | 16.56 | Trans. capacity | 0.597kw/r/min |
| 17.95 | 0.551kw/r/min | ||
| 20.2 | 0.491kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 240KN | ||
| Center distance | 736mm | ||
| L×W×H | 1235x1570x1789mm | ||
| Net weight | 4200kg | ||
| Flywheel | SAE21,18,16 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCT800/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact structure, larger ratio and convenient in dis- and reassembly and maintenance.
|
Input speed |
600-1800r/min |
||
|
Reduction ratio |
6.91,7.28,7.69,8.12,8.60,9.12,9.68 |
Trans. capacity |
0.625kw/r/min |
|
10.30 |
0.609kw/r/min |
||
|
10.98 |
0.575kw/r/min |
||
|
11.76 |
0.549kw/r/min |
||
|
12.43 |
0.520kw/r/min |
||
|
13.17 |
0.491kw/r/min |
||
|
13.97 |
0.463kw/r/min |
||
|
14.85 |
0.435kw/r/min |
||
|
15.82 |
0.408kw/r/min |
||
|
16.58 |
0.382kw/r/min |
||
|
17.91 |
0.378kw/r/min |
||
|
20.1 |
0.278kw/r/min |
||
| Control way |
Push-and-pull flexible shaft, electrically, pneumatically |
||
| Rated thrust |
220KN |
||
| Center distance |
582mm |
||
| L×W×H |
1152x1360x1557mm |
||
| Net weight |
3200kg |
||
| Flywheel |
SAE21,18,16 |
||
| Bell housing |
SAE00,0 |
||
Marine Gearbox HCT600A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in small in volume, light in weight and large in ratio.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 6.06 | Trans. capacity | 0.44kw/r/min |
| 6.49 | 0.40kw/r/min | ||
| 6.97,7.51 | 0.37kw/r/min | ||
| 8.04 | 0.33kw/r/min | ||
| 8.66 | 0.29kw/r/min | ||
| 9.35 | 0.28kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 90KN | ||
| Center distance | 415mm | ||
| L×W×H | 805×1094×1271mm | ||
| Net weight | 1650kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCT600A/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in small in volume, light in weight and large in ratio.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 7.043,7.69,8.23 | Trans. capacity | 0.441kw/r/min |
| 8.82 | 0.412kw/r/min | ||
| 9.47 | 0.400kw/r/min | ||
| 10.10 10.80 | 0.375kw/r/min | ||
| 11.65 | 0.353kw/r/min | ||
| 12.57 | 0.331kw/r/min | ||
| 14.44 | 0.257kw/r/min | ||
| 15.91 | 0.204kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 500mm | ||
| L×W×H | 878x1224x1346mm | ||
| Net weight | 1700kg | ||
| Flywheel | SAE21,18,16 | ||
| Bell housing | SAE00,0 | ||
.
Marine Gearbox HCT400A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in small in volume, large in ratio, light in weight and higher loading capacity.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 6.09,6.49,6.93 | Trans. capacity | 0.331kw/r/min |
| 7.42 | 0.309 kw/r/min | ||
| 7.95 | 0.287kw/r/min | ||
| 8.40 | 0.265 kw/r/min | ||
| 9.00,9.47 | 0.243 kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 82KN | ||
| Center distance | 375mm | ||
| L×W×H | 784×992×1130mm | ||
| Net weight | 1450kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE0,1 | ||
Marine Gearbox HCT400A/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, larger ratio, and higher loading capacity.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 8.15,8.69,9.27 | Trans. capacity | 0.331kw/r/min |
| 9.94 | 0.316 kw/r/min | ||
| 10.60 | 0.297kw/r/min | ||
| 11.37 | 0.274 kw/r/min | ||
| 12.00 | 0.262 kw/r/min | ||
| 14.00 | 0.204 kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 120KN | ||
| Center distance | 465mm | ||
| L×W×H | 869×1100×1275mm | ||
| Net weight | 1500kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE0,1 | ||
Marine Gearbox HCT2000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1500r/min | ||
| Reduction ratio | 5.185,5.494,5.943, 6.583,7.012,7.483,8 |
Trans. capacity | 1.48kw/r/min |
| 8.57 | 1.42kw/r/min | ||
| 8.843 | 1.34kw/r/min | ||
| 9.428 | 1.23kw/r/min | ||
| 10.05 | 1.21kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 280KN | ||
| Center distance | 625mm | ||
| L×W×H | 1284x1600x1835mm | ||
| Net weight | 5600kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | NO | ||
Marine Gearbox HCT1600 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 500-1650r/min | ||
| Reduction ratio | 5.545,5.972,6.585, 6.99,7.456,7.9 |
Trans. capacity | 1.213kw/r/min |
| 8.45 | 1.104kw/r/min | ||
| 9 | 1.104kw/r/min | ||
| 9.5 | 0.93kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 250KN | ||
| Center distance | 585mm | ||
| L×W×H | 1246x1500x1750mm | ||
| Net weight | 4200kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HCT1400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 4,4.511,5.03,5.52,5.97, 6.48,7.03,7.50,8.01 |
Trans. capacity | 1.03kw/r/min |
| 8.465 | 1kw/r/min | ||
| 8.593 | 0.96kw/r/min | ||
| 8.984 | 0.93kw/r/min | ||
| 9.118 | 0.90kw/r/min | ||
| 9.552 | 0.85kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 220KN | ||
| Center distance | 550mm | ||
| L×W×H | 1306x1380x1750mm | ||
| Net weight | 3700kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HCT1200 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 700-1600r/min | ||
| Reduction ratio | 5.05,5.60,5.98,6.39, 6.85,7.35,7.90 |
Trans. capacity | 0.93kw/r/min |
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 150KN | ||
| Center distance | 500mm | ||
| L×W×H | 1188*1350*1547mm | ||
| Net weight | 3050kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00 0 | ||
Marine Gearbox HCT1100 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and two-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 700-1800r/min | ||
| Reduction ratio | 4.94,5.60,5.98,6.39 | Trans. capacity | 0.846kw/r/min |
| 6.85 | 0.835kw/r/min | ||
| 7.35 | 0.772kw/r/min | ||
| 7.90 | 0.736kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 150KN | ||
| Center distance | 500mm | ||
| L×W×H | 1150x1350x1547mm | ||
| Net weight | 3000kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00 0 | ||
Marine Gearbox HCD800 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 3.0,3.429,3.960,4.167,4.391 | Trans. capacity | 0.625kw/r/min |
| 4.905 | 0.588kw/r/min | ||
| 5.474 | 0.551kw/r/min | ||
| 5.889 | 0.515kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 110KN | ||
| Center distance | 450mm | ||
| L×W×H | 1056x1280x1341mm | ||
| Net weight | 2200kg | ||
| Flywheel | SAE21,18,16 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCD600A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and large in ratio.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 4.18,4.43 | Trans. capacity | 0.48kw/r/min |
| 4.70 | 0.46kw/r/min | ||
| 5.00 | 0.44kw/r/min | ||
| 5.44,5.71 | 0.4kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 90KN | ||
| Center distance | 415mm | ||
| L×W×H | 745x1094x1271mm | ||
| Net weight | 1550kg | ||
| Flywheel | SAE21,18,16,14 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HCD400A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and high in loading capacity.
| Input speed | 1000-1800r/min | ||
| Reduction ratio | 3.96,4.33,4.43,4.476,4.70,5.00 | Trans. capacity | 0.331kw/r/min |
| 5.53 | 0.293 kw/r/min | ||
| 5.70,5.89 | 0.272kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 82KN | ||
| Center distance | 355mm | ||
| L×W×H | 641×950×988mm | ||
| Net weight | 1100kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE0,1 | ||
Marine Gearbox HCD2700 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 500-1400r/min | ||
| Reduction ratio | 3.65,4.042,4.5,5.05 | Trans. capacity | 2.05kw/r/min |
| 5.476 | 1.96kw/r/min | ||
| 6.105 | 1.7kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 280KN | ||
| Center distance | 630mm | ||
| L×W×H | 1400x1780x1530mm | ||
| Net weight | 6000kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | NO | ||
Marine Gearbox HCD2000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1500r/min | ||
| Reduction ratio | 3,3.577,3.958,4.455,4.95 | Trans. capacity | 1.48kw/r/min |
| 5.263 | 1.42kw/r/min | ||
| 5.429 | 1.34kw/r/min | ||
| 5.75 | 1.23kw/r/min | ||
| 6.053 | 1.21kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 220KN | ||
| Center distance | 560mm | ||
| L×W×H | 1600*1620*1645mm | ||
| Net weight | 4000kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | NO | ||
Marine Gearbox HCD1400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 4.04,4.27,4.52,4.8,5.045,5.5 | Trans. capacity | 1.03kw/r/min |
| 5.857 | 0.778kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 175KN | ||
| Center distance | 485mm | ||
| L×W×H | 1260*1380*1360mm | ||
| Net weight | 2800kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | NO | ||
Marine Gearbox HCD138 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in large in ratio, small in volume and light in weight.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 5.05,5.63 | Trans. capacity | 0.110kw/r/min |
| 6.06 | 0.099kw/r/min | ||
| 6.47 | 0.093kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 40KN | ||
| Center distance | 296mm | ||
| L×W×H | 494×800×870mm | ||
| Net weight | 415kg | ||
| Flywheel | 6135Ca,SAE14,11.5 | ||
| Bell housing | 6135Ca,SAE1,2 | ||
Marine Gearbox HCD1000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and convenient in dis- and reassembly and maintenance.
| Input speed | 600-1900r/min | ||
| Reduction ratio | 3.429,3.96,4.391,4.45,4.905,5.06 | Trans. capacity | 0.735kw/r/min |
| 5.474 | 0.68kw/r/min | ||
| 5.833 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 450mm | ||
| L×W×H | 1082*1280*1345mm | ||
| Net weight | 1900kg | ||
| Flywheel | SAE21,18 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HC600A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 2.00,2.48,3.00 | Trans. capacity | 0.48kw/r/min |
| 3.58 | 0.44kw/r/min | ||
| 3.89 | 0.40kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 90KN | ||
| Center distance | 320mm | ||
| L×W×H | 745*1094*1126mm | ||
| Net weight | 1300kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox HC400 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and high in loading capacity.
| Input speed | 1000-1800r/min | ||
| Reduction ratio | 1.50,1.77,2.04,2.50,2.86,3.00,3.42 | Trans. capacity | 0.331kw/r/min |
| 4.06 | 0.279 kw/r/min | ||
| 4.61,4.94 | 0.190 kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 82KN | ||
| Center distance | 264mm | ||
| L×W×H | 641×950×890mm | ||
| Net weight | 820kg | ||
| Flywheel | SAE18,16,14 | ||
| Bell housing | SAE0,1 | ||
Marine Gearbox HC300 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, and light in weight.
| Input speed | 700-2500r/min | ||
| Reduction ratio | 1.5,1.87,2.04,2.23,2.54,3,3.53 | Trans. capacity | 0.257kw/r/min |
| 4.1,4.47 | 0.2kw/r/min | ||
| 4.61 | 0.184kw/r/min | ||
| 4.94 | 0.147kw/r/min | ||
| 5.44 | 0.13kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 50KN | ||
| Center distance | 264mm | ||
| L×W×H | 680×930×880mm | ||
| Net weight | 680kg | ||
| Flywheel | 12V135,12V150,SAE18,16,14 | ||
| Bell housing | 12V135,12V150,SAE0,1 | ||
Marine Gearbox HC138 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and large in ratio.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 2.0,2.52,3.00,3.57,4.05,4.45 | Trans. capacity | 0.110kw/r/min |
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 30KN | ||
| Center distance | 225mm | ||
| L×W×H | 520×792×760mm | ||
| Net weight | 360kg | ||
| Flywheel | 6135Ca,SAE14,11.5 | ||
| Bell housing | 6135Ca,SAE1,2,3 | ||
Marine Gearbox HC1250 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, and easy in dismantle & reassemble and maintain.
| Input speed | 400-1800r/min | ||
| Reduction ratio | 2.032,2.481,3.043,3.476 | Trans. capacity | 0.919kw/r/min |
| 3.947 | 0.850kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 390mm | ||
| L×W×H | 1155x1330x1435mm | ||
| Net weight | 2200kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | No | ||
Marine Gearbox HC1200 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, and easy in dismantle & reassemble and maintain.
|
Input speed |
600-1900r/min |
||
|
Reduction ratio |
1.6,2.03,2.476,2.5,2.96,3.55 |
Trans. capacity |
0.93kw/r/min |
|
3.79 |
0.88kw/r/min |
||
|
4.05 |
0.80kw/r/min |
||
|
4.20 |
0.695kw/r/min |
||
|
4.47 |
0.650kw/r/min |
||
| Control way |
Push-and-pull flexible shaft, electrically, pneumatically |
||
| Rated thrust |
120KN |
||
| Center distance |
380mm |
||
| L×W×H |
1082x1200x1130mm |
||
| Net weight |
2000kg |
||
| Flywheel |
Depend on engine flywheel |
||
| Bell housing |
SAE00 0 |
||
Marine Gearbox HC1200/1 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure, large in ratio, and easy in dismantle & reassemble and maintain.
| Input speed | 600-1800r/min | ||
| Reduction ratio | 3.74,3.95,4.45 | Trans. capacity | 0.93kw/r/min |
| 5 | 0.833kw/r/min | ||
| 5.25 | 0.695kw/r/min | ||
| 5.58 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 140KN | ||
| Center distance | 450mm | ||
| L×W×H | 1096x1260x1270mm | ||
| Net weight | 2500kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00 0 | ||
Marine Gearbox HC1000 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in compact in structure and easy in dismantle & reassemble and maintain.
| Input speed | 600-1900r/min | ||
| Reduction ratio | 2,2.5,3.04,3.48 | Trans. capacity | 0.735kw/r/min |
| 4.06 | 0.65kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 110KN | ||
| Center distance | 335mm | ||
| L×W×H | 1082x1120x990mm | ||
| Net weight | 1700kg | ||
| Flywheel | Depend on engine flywheel | ||
| Bell housing | SAE00,0 | ||
Marine Gearbox 40A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume and light in weight.
| Input speed | 750-2000r/min | ||
| Reduction ratio | 2.07,2.96 | Trans. capacity | 0.030kw/r/min |
| 3.44 | 0.571kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically | ||
| Rated thrust | 8.8KN | ||
| Center distance | 142mm | ||
| L×W×H | 490×670×620mm | ||
| Net weight | 225kg | ||
| Flywheel | 4110C,SAE14,11.5 | ||
| Bell housing | 4110C,SAE1,2,3 | ||
Marine Gearbox 26 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 2.5,3 | Trans. capacity | 0.0199kw/r/min |
| 3.5 | 0.0190kw/r/min | ||
| 4 | 0.0177kw/r/min | ||
| Control way | Manually | ||
| Rated thrust | 5KN | ||
| Center distance | 135mm | ||
| L×W×H | 473.5×365×830mm | ||
| Net weight | 92kg | ||
| Flywheel | 4105C | ||
| Bell housing | 4105C | ||
Marine Gearbox 16A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
.
| Input speed | 1000-2000r/min | ||
| Reduction ratio | 2.07,2.48,2.95,3.35,3.83 | Trans. capacity | 0.012kw/r/min |
| Control way | Manually | ||
| Rated thrust | 3.5KN | ||
| Center distance | 135mm | ||
| L×W×H | 422×325×563mm | ||
| Net weight | 84kg | ||
| Flywheel | 2105C 395,SAE11.5,10 | ||
| Bell housing | 2105C 395,SAE3,4 | ||
Marine Gearbox 135 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
| Input speed | 750-2000r/min | ||
| Reduction ratio | 2.03,2.59,3.04,3.62,4.11 | Trans. capacity | 0.10kw/r/min |
| 4.65 | 0.093kw/r/min | ||
| 5.06 | 0.088kw/r/min | ||
| 5.47 | 0.077kw/r/min | ||
| 5.81 | 0.070kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically | ||
| Rated thrust | 29.4KN | ||
| Center distance | 225mm | ||
| L×W×H | 578×744×830mm | ||
| Net weight | 470kg | ||
| Flywheel | 6135Ca,SAE14 | ||
| Bell housing | 6135Ca,SAE1 | ||
Marine Gearbox 120B possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, light in weight and easy in dismantle & reassemble and maintain.
| Input speed | 750-1800r/min | ||
| Reduction ratio | 2.03,2.81 | Trans. capacity | 0.088kw/r/min |
| 3.73 | 0.044kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically | ||
| Rated thrust | 25KN | ||
| Center distance | 190mm | ||
| L×W×H | 605×744×770mm | ||
| Net weight | 400kg | ||
| Flywheel | 6135Ca,4120,SAE14 | ||
| Bell housing | 6135Ca,4120,SAE1 | ||
Marine Gearbox 06 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is mechanically controlled, featuring in small in volume and light in weight.
| Input speed | 1000-2100r/min | ||
| Reduction ratio | 2.52,3.05,3.50 | Trans. capacity | 0.004kw/r/min |
| Control way | Manually | ||
| Rated thrust | 1.8KN | ||
| Center distance | 124mm | ||
| L×W×H | 350×316×482mm | ||
| Net weight | 58kg | ||
| Flywheel | 195C | ||
| Bell housing | 195C | ||
ADVANCE Marine Gearbox D300A is suitable for fishing, tug, engineering and transport boats
Marine Gearbox D300A possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and easy in dismantle & reassemble and maintain.
Marine Gearbox 300 possesses functions of speed reduction, ahead and astern clutching and bearing propeller thrust. It is designed of vertically offset and one-stage transmission, featuring in small in volume, large in ratio, light in weight and easy in dismantle & reassemble and maintain.
| Input speed | 1000-2500r/min | ||
| Reduction ratio | 4.00 | Trans. capacity | 0.257kw/r/min |
| 4.48 | 0.243kw/r/min | ||
| 5.05 | 0.221kw/r/min | ||
| 5.52,5.90 | 0.184kw/r/min | ||
| 6.56,7.06 | 0.147kw/r/min | ||
| 7.63 | 0.125kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 60KN | ||
| Center distance | 355mm | ||
| L×W×H | 786×980×1041mm | ||
| Net weight | 940kg | ||
| Flywheel | 12V135,SAE18,16,14 | ||
| Bell housing | 12V135,SAE0,1 | ||
| Input speed | 750-2500r/min | ||
| Reduction ratio | 1.87,2.04,2.54 | Trans. capacity | 0.257kw/r/min |
| 3.00 | 0.243kw/r/min | ||
| 3.53 | 0.221kw/r/min | ||
| 4.10,4.47,4.61 | 0.184kw/r/min | ||
| 4.94 | 0.147kw/r/min | ||
| 5.44 | 0.125kw/r/min | ||
| Control way | Push-and-pull flexible shaft, electrically, pneumatically | ||
| Rated thrust | 50KN | ||
| Center distance | 264mm | ||
| L×W×H | 786×930×864mm | ||
| Net weight | 740kg | ||
| Flywheel | 12V135,12V150,SAE18,16,14 | ||
| Bell housing | 12V135,12V150,SAE0,1
|
||
| Application: | Marine |
|---|---|
| Function: | Speed Reduction |
| Layout: | Cycloidal |
| Hardness: | Soft Tooth Surface |
| Installation: | Oscillating Base Type |
| Step: | Double-Step |
| Customization: |
Available
| Customized Request |
|---|
Benefits of Regular Gearbox Maintenance
Regular maintenance of gearboxes offers numerous advantages:
- Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
- Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
- Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
- Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
- Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
- Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
- Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
- Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
- Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.
Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.
editor by CX 2023-11-02
China Standard 24V 25W DC Worm Gear Motor High Torque Reduction Gearbox best automatic gearbox
Product Description
24v 25w DC Worm Gear Motor High Torque Reduction Gearbox
Model:D49D1-24V25W-500RPM
| Type | dc worm gear motor | ||
| Motor Diameter | 49mm | ||
| Voltage | 12v 24v 36v 42v 48v 110v 220v | ||
| Power | ≤25W | ||
| Torque | ≤8N.M | ||
| Speed | ≤250RPM | ||
| Gear of ratio | 56:1 28:1 70:1 | ||
| Gear Modulus | 70:1 M=0.8 56:1 28:1 M=1 |
||
| Material of gear | Plastic /brass | ||
| OEM/ODM Service | Accept | ||
| Usage | Electric clothes rack ,electric height adjustable table ,smart home appliance,vending machine ,coffee machine , industrial machine ,auto garage door opener,other electric tools . | ||
HangZhou CHINAMFG Science & Technology Co.,Ltd is a subsidiary of HangZhou CHINAMFG Motor Co.,Ltd.The factory is located in Xihu (West Lake) Dis.,HangZhou,we can design and manufacture of motors according to all our customers’ demands so far,we can manufacture about 60,000 motors per month.
Our main market:
Europe,America and Asia, including UnitedKingdom, Germany, Italy, France, Sweden, United State,Brazil,India,Korea and so on.
Company Advantages:
1. Big production capacity, fast delivery.
2. Strict QC inspecting rules: all products must be 100% inspected before delivery.
3. OEM/ODM services are available
4. 24 hours online service.
5. Prompt quotation for your inquiry
6. Quality,reliability and long product life.
7. Professional manufacturer offers competitive price.
8. Diversified rich experienced skilled workers.
More Applications:
Car simulator ,garage door opener ,gate operator, wheelchair ,electric vehicle ,water pump ,oil pump,smart electric-drive curtain,lift gate,glass lifter,floor polisher, office intelligent equipment,sewing machine,vending machine,blender machine,truck lift,stair lift,hospital bed ,hydraulic pump electric forklift.
RFQ:
Q: Are you trading company or manufacturer ?
A: We are Integration of industry and trade, with over 20 years experience in DC worm gear motor. Our company have accumulated skilled production line, complete management and powerful research support, which could match all of the customers’ requirements and make them satisfaction.
Q: What is your main product?
–DC Motor: Gear motor, Square motor, Stepped motor, and Micro motor
-Welding equipment: Wire feeder, Welding rod, Welding Torch, Earth clamp, Electrode holder, and Rectifier
Q: What if I don’t know which DC motor I need?
A: Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.
Q: What is your terms of payment ?
A: Payment=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:
Q: How to delivery:
A: By sea – Buyer appoint forwarder, or our sales team find suitable forwarder for buyers.
By air – Buyer offer collect express account, or our sales team find suitable express for buyers. (Mostly for sample)
Others – Actually,samples send by DHL,UPS, TNT and Fedex etc. We arrange to delivery goods to some place from China appointed by buyers.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
| Application: | Universal, Industrial, Household Appliances, Power Tools, Automatic Lifting Machine |
|---|---|
| Operating Speed: | Low Speed |
| Excitation Mode: | Permanent Magnet Motor |
| Samples: |
US$ 150/Piece
1 Piece(Min.Order) | Order Sample Sample fee will be returned when order reaches 200
|
|---|
| Customization: |
Available
| Customized Request |
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Benefits of Regular Gearbox Maintenance
Regular maintenance of gearboxes offers numerous advantages:
- Extended Lifespan: Proper maintenance helps prevent premature wear and breakdown, increasing the gearbox’s overall lifespan.
- Reduced Downtime: Regular inspections and maintenance can identify issues early, minimizing unplanned downtime for repairs.
- Improved Efficiency: Well-maintained gearboxes operate more efficiently, leading to energy savings and optimized performance.
- Cost Savings: Routine maintenance reduces the need for costly major repairs or replacements.
- Enhanced Safety: Regular maintenance ensures safe operation by addressing potential hazards and malfunctions.
- Optimal Performance: Properly maintained gearboxes deliver consistent and reliable performance for machinery and equipment.
- Preserved Functionality: Maintenance prevents issues that could lead to reduced functionality or complete failure.
- Reduced Environmental Impact: Well-maintained gearboxes consume less energy and minimize waste, contributing to sustainability efforts.
- Compliance: Regular maintenance helps meet industry regulations and standards for equipment safety and performance.
Implementing a proactive maintenance plan can provide these benefits and contribute to the overall success of your machinery and operations.
editor by CX 2023-10-30
China manufacturer CZPT Gft110 Planetary Gearbox, Gft110W3b115 Gearbox for Rigs automatic gearbox
Product Description
Product Description
Rexroth GFT110 Planetary Gearbox, GFT110W3B115 Gearbox For Rigs
Detailed Photos
Rexroth GFT Series Gearbox is an ideal driving component for wheel or track driving vehicles, and other moving equipment and widely applied in excavator, spreading machine, drill machine, mobile crusher, engineering machinery, mining, tunnel machinery, agricultural machinery, etc. Meanwhile, different motor connectors and dimensions are available on request. It is an ideal replacement of CHINAMFG products.
Rexroth Gft Planetary Gearbox, Final Drive GFT17 GFT24 Gft36 GFT 40 GFT50 Gft60 Gft80 Gft110 Gft160
R988/8822 0571
R988/8822 0571
R98857133 GFT60W3B86~/8822 0571
R GFT7T2B51-01
R98857156 GFT7T2B63-01
R9880 0571 9 GFT80T3-185-03
R9880 0571 6 GFT80T3B127-01 W/O MOTOR
R988056701 GFT80T3B127-09
R988064513 GFT80T3B127-09 W/O MOTOR
R988006366 GFT80T3B150-01
R988006367 GFT80T3B150-02
R988006370 GFT80T3B185-06
R98857127 GFT80T3B185-10
R988049613 GFT80T3B185-10 W/O MOTOR
R988062758 GFT80T3B185-11
R988006374 GFT80T3B204
R988006375 GFT80T3B77-01
R988006551 GFT80W3B127-07
R988006866 GFT80W3B127-14
R988018309 GFT80W3B127-17
R98857113 GFT80W3B127-19
R98857163 GFT60A3B65-03
R988006277 GFT60T3B106-03
R9880 0571 6 GFT60T3B106-05 W/O MOTOR
R988006284 GFT60T3B106-13
R988006286 GFT60T3B120-06
R GFT60T3B140-19
R988 0571 1 GFT60T3B140-20
R988006307 GFT60T3B170-06
R988006308 GFT60T3B170-08
R9880 0571 5 GFT60T3B170-12 W/O MOTOR
R GFT60T3B64-01
R9880 0571 4 GFT60T3B86-02
R9880 0571 2 GFT60W3B106-06
R9880 0571 3 GFT60W3B106-11
R988054345 GFT60W3B106-20
R988018532 GFT60W3B170-11
R988007035 GFT60W3B400 W/O MOTOR
R988006589 GFT60W3B64-01
R988006591 GFT60W3B64-02
R988006526 GFT60W3B64-03
R9885711 GFT60W3B64-09
R988054749 GFT60W3B64-10
R988064141 GFT60W3B64-12
R988006136 GFT24T2B19-01
R988006137 GFT24T2B19-03
R988006143 GFT24T3B103-07
R988049105 GFT26T2B43-08
R988006159 GFT26T2B51-02
R988006160 GFT26T2B62-06
R988006173 GFT26W2B62-06
R988006177 GFT26W2B62-10
R988006178 GFT26W2B62-15
R988018533 GFT26W2B62-20
R GFT34T2B43-01
R988006187 GFT36T2B28-02
R988006189 GFT36T3-131-04
R9885719 GFT36T3-131-04 W/O MOTOR
R988006199 GFT36T3B100-12
R988006216 GFT36T3B139-01
R9885712 GFT36T3B139-02 W/O MOTOR
R988046030 GFT36T3B139-07
R GFT36T3B67-15
R988006228 GFT36T3B79-09
R988006966 GFT36T3B79-09 W/O MOTOR
R988065729 GFT36W3B100-06
R988006244 GFT36W3B67-03
R988017691 GFT36W3B67-16
R988006255 GFT36W3B79-25
R988040808 GFT36W3B79-30
R98857110 GFT36W3B79-32
R9885718 GFT40T2B41-04
R98804 0571 GFT40T2B41-05
R988006266 GFT40W2B49-01
R988006267 GFT40W2B49-02
R988046595 GFT40W2B59-15
R98857123 GFT40W2B59-16
R GFT40W2B59-17
R GFT50T3B100-01
R98857162 GFT50T3B177-04
R988006274 GFT60A2B40-01
R98805711 GFT110W3B96-09
R988018531 GFT110W3B96-21
R988044467 GFT110W3B96-28
R GFT110W3B96-30
R GFT110W3B96-34
R98857173 GFT110W3B96-36
R98857175 GFT110W3B96-38
R988065817 GFT110W3B96-40
R988017539 GFT13T2B32-01
R988006082 GFT17T2B45-21
R988006086 GFT17T2B45-25
R988017334 GFT17T2B45-33
R988006089 GFT17T2B54-04
R988006090 GFT17T2B54-05
R988006093 GFT17T2B54-09
R988006886 GFT17T2B54-12 W/O MOTOR
R98857112 GFT17T2B54-22
R988006105 GFT17T3B78-07
R98857124 GFT17T3B88-05
R988006118 GFT17W2B45-15
R988006119 GFT17W2B45-16
R988058732 GFT17W3B78-06 W/O MOTOR
R91605715 GFT2160E/30-AAAA0045M1-HA1/0170AS0-0CJ
R916008231 GFT2160E/30-AAAA0045M1-HA1/0170AS0-0CJ
R988056777 GFB26T2B52-02
R988005877 GFB26T2B63-12
R988005879 GFB36T2B24-04
R988005881 GFB36T2B24-06
R988056999 GFB36T3B101-12
R988005909 GFB36T3B101-29
R9885710 GFB36T3B101-30
R9885711 GFB36T3B101-31
R9885713 GFB36T3B101-33
R9885717 GFB36T3B101-37
R988006816 GFB36T3B101-38
R98805712 GFB36T3B118-06
R98805714 GFB36T3B118-10
The reducer for concrete mixer trucks is used in the transmission system of concrete mixer trucks.
The reducer adopts planetary gear transmission, which has the characteristics of stable torque driving, compact structure, less maintenance and long service life. The reduction gear body can be bolted to the mounting bracket of the frame or directly connected to the frame and connected to the drum through the output flange. The output flange allows for a certain angle of oscillation in all directions to meet the requirements of various complex conditions. This reducer acts as a front support for the drum and drives the drum to rotate through the output flange.
We could supply the CHINAMFG hydraulic pump and motor, also the inner spare parts as below model:
1 A8VO: A8VO55,A8VO80,A8VO107,A8VO160
2,A2FO: A2FO5 A2FO10 A2F12 A2FO16 A2FO23,A2FO28,A2FO32,A2FO45,A2FO56,A2FO63 A2FO80
3,A4VSO: A4VSO40,A4VSO45,A4VSO56,A4VSO71,A4VSO125,A4VSO180,A4VSO250,A4VSO500,
4,A4VG: A4VG28,A4VG45,A4VG50,A4VG56,A4VG71,A4VG125,A4VG180,A4VG250
5,A6V: A6V55,A6V80,A6V107,A6V160,A6V225,A6V250
6,A7V: A7V16,A7V28,A7V55,A7V80,A7V107,A7V160,A7V200,A7V250
7,A8V: A8V55,A8V80,A8V107,A8V115,A8V172
8,A10VSO: A10VSO10,A10VSO18 A10VSO28,A10VSO43,A10VSO45,A10VSO71,A10VSO100,A10VSO140
9,A10VD: A10VD17,A10VD21,A10VD28,A10VD43,A10VD71
10,A11V: A11V50 A11V90 A11V130,A11V145 A11V160,A11V190,A11V250
11,PVV,PV7: PV2.PVV4.PVV5.PVV21.PVV41.PVV42.PVV51.PVV52.PVV54,PV7-1X,PV7-2X
12,PGF,PGH,PGP: GF1-2X,PGF2-2X,PGF3-3X,PGH2-2X,PGH3-2X,PGH4-2X,PGH5-2X,PGP2-2X,PGP3-3X
13 Others: AP2D21,AP2D25,AP2D36,AP2D38
| Usage | Excavator or Rig |
FAQ
Q:What Is Our Main Application?
A:1.Hydraulic system
2.Agriculture machine
3.Construction machina
4.Automobile
5.Local distributors
Q:What Is The Payment Terms?
A:Full order:30% as desposit, the balance before shipment:
Small order /sample ordre: full payment in advance:
Q:Can I Mark My Own Brand On The Pump?
A:Yes. Full order can mark your brand and code.
Q:What Is Our Main Export Market?
A:Europe (41.7%):Italy,Germany,England,France,Holland,Greece,Spain,Portugal,Swissland,Finland,Czekh,Russia,Poland
Asia(40.5%):China,Korea,Singapore,India,Turkey,Iran,Vietnam,Saudi Arabia,Syria,Isreal,Lebanon
| Application: | Agricultural Machinery, Rig |
|---|---|
| Layout: | Coaxial |
| Hardness: | Soft Tooth Surface |
| Installation: | Vertical Type |
| Step: | Single-Step |
| Type: | Planetary Gear Box |
| Customization: |
Available
| Customized Request |
|---|
Is it Better to Repair or Replace a Damaged Gearbox?
Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:
- Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
- Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
- Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
- Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
- Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
- Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
- Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.
Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.
editor by CX 2023-10-18
China best Low backlash high revolving speed gearbox PBMD 40 1 automatic gearbox
Product Description
Technical services:
- According to the relevant parameters provided by the customer, the CHINAMFG engineering software is used to create the motion load curve diagram of the mechanism equipment to obtain the corresponding parameters and derive the motion load curve. Intuitively display important parameters and load indexes in the transmission system to help customers carry out reasonable structural design.
- SIGRINER provides a motor database from 500 servo motor manufacturers worldwide
Customer training:
We are honored to provide you with our applied computing and transmission design expertise. We can provide relevant training according to your needs. We can provide relevant training according to your needs.
Specific
PBMD/PBMD*HIGH PRECISION
Low backlash high revolving speed gearbox
Standard specification apply to high positioning accuracy and high dynamic period working system
Especially for continuously work in high revolving speed
PBMD/PBMD*HIGH PRECISION necessary way to high efficiency
Models and Applications
PBM (standard)
Cycle Applications (ED≤60%)
High dynamic applications
High positioning accuracy
Reverse operation
PBMD*HIGH PERCISION
Application of continuous operation (ED≤60%)
High rated speed
Temperature-sensitive applications
High quality control transmission
Technical data
PBMD PBMD*HIGH PRECISION
Size 90 90
I 3-100 3-100
Jt standard ( arcmin ) ≤3,≤5 ≤1
T2B (NM) 4500 3600
N1Max(rpm) 6000 8000
PBMD 40*1 STAGE
| STAGE | 1 | ||||||||
| Gear ratio | i | 3 | 4 | 5 | 7 | 8 | 10 | ||
| Rated output torque (1000 times is allowed in gear box) |
T 2N | Nm | 15 | 17 | 20 | 18 | 17 | 15 | |
| In.lb | 133 | 150 | 177 | 159 | 150 | 133 | |||
| T 2NOt | Nm | 1.5xNOM.Output/ 1.5 times rated output torque | |||||||
| In.lb | |||||||||
| Rated input RPM (T2N, 20ºC environment temperature) b | N 1n | rpm | 3000 | 3000 | 3000 | 3000 | 3000 | 3000 | |
| Max. Input RPM | N 1max | rpm | 6000 | 6000 | 6000 | 6000 | 6000 | 6000 | |
| Max.backlash | J t | arcmin | PBMD40≤5 ARCMIN | ||||||
| Max.radical force | F 2AMAX | N | 300 | ||||||
| ibf | 68 | ||||||||
| Max.axial force | F 3RMAX | N | 180 | ||||||
| ibf | 41 | ||||||||
| Max.side force | M 2KMAX | Nm | |||||||
| In.lb | |||||||||
| Work life | L h | hr | ≥20000 | ||||||
| Fully loaded efficiency | η | % | 95 | ||||||
| Environment temperature | ºC | -15 to 40 | |||||||
| F | 5 to 104 | ||||||||
| Allowable highest temperature of shell |
ºC | +90 | |||||||
| F | 194 | ||||||||
| Lubrication | Synthetic Grease | ||||||||
| Rotation direction | Input/output with same direction | ||||||||
| Protection class | IP65 | ||||||||
| Installation direction | Any/ any direction | ||||||||
| Working noise (i=10 and n1=3000rpm no-load) |
Lpa dB(A) | ≤65 | |||||||
| Moment of inertia | J1 | Kg.cm² | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | |
| 10-3in.lb.s2 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | 0.3 | |||
Industry application
- We provide fast supply and strong support all over the world through a complete sales and service network
- With years of rich experience, our authoritative experts provide market-leading consulting services for various industrial sectors
- Robotics, automation and manipulator technology
A variety of servo gearboxes and mechanical transmission systems, from economical to high-end models; can be applied to various robots and their auxiliary axes, such as transmission shafts and station control devices
Printing machine
Innovative gearbox ensures stability, synchronization accuracy and long-term accuracy even at high speeds
The perfect solution for high-quality printing processes and other continuous duty applications
Option: integrated sensor for monitoring paper tension and similar parameters
- Machine tools and manufacturing systems
High precision, stable operation and high efficiency are all derived from stable, zero backlash and high rigidity mechanical system solutions, such as the application of products on feed, rotation and auxiliary axes
| Application: | Motor, Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Layout: | Expansion |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Single-Step |
How to Choose the Right Gearbox for Your Machinery
Selecting the appropriate gearbox for your machinery involves careful consideration of several key factors. Here’s a step-by-step guide to help you make the right choice:
- Identify Application Requirements: Understand the specific requirements of your machinery, including torque, speed, load, direction of rotation, and duty cycle.
- Choose Gear Type: Determine the type of gears that best suit your needs, such as spur, helical, bevel, planetary, or others, based on factors like efficiency, noise level, and space constraints.
- Calculate Gear Ratio: Calculate the required gear ratio to achieve the desired output speed and torque. Consider factors like input and output shaft speeds.
- Select Gear Material: Choose appropriate gear materials based on factors like durability, wear resistance, and corrosion resistance. Common materials include steel, cast iron, and various alloys.
- Consider Efficiency: Evaluate the gearbox’s efficiency and select one that meets your energy efficiency requirements.
- Account for Load Conditions: Analyze the load conditions, such as constant or intermittent loads, shock loads, and starting and stopping frequencies.
- Check Lubrication Requirements: Consider the lubrication needs of the gearbox and ensure proper lubrication for smooth operation and longevity.
- Factor in Space Constraints: Consider the available space for installing the gearbox and choose a size that fits within your machinery.
- Assess Environmental Conditions: Evaluate the operating environment, including temperature, humidity, and exposure to dust or corrosive substances.
- Review Mounting Options: Determine the mounting options that work best for your machinery, such as foot-mounted, flange-mounted, or shaft-mounted gearboxes.
- Consult with Experts: Seek advice from gearbox manufacturers or engineers to ensure you make an informed decision.
Choosing the right gearbox is crucial for achieving optimal machinery performance, longevity, and reliability.
editor by CX 2023-10-07
China Professional Gearbox 16y-15-0000/154-15-31000/154-15-41002/175-15-00226 for CZPT SD16/SD23/SD32 best automatic gearbox
Product Description
Part Name: Gearbox
Part Number: 16Y-15–1 VALVE
706-77-77130 VALVE
235-44-11810 CHECK VALVE
208-60-51430 VALVE
380-153-2 VALVE ASS`Y
706-77-79302 VALVE ASS`Y
235-60-11150 VALVE ASS`Y
208-62-38380 VALVE
-1 BRAKE VALVE
706-77-81301 BRAKE VALVE ASS
235-60-11460 VALVE
208-62-519-1 VALVE
706-77-85401 RELIEF VALVE AS
235-60-11620 VALVE
208-62-61211 VALVE ASS`Y
-1 CONTROL VALVE A
706-7C-51140 VALVE
235-60-12521 VALVE ASS`Y
208-62-61301 VALVE ASS`Y
-2 CHECK VALVE
706-86-41841 VALVE PLATE
235-60-19110 VALVE
208-62-62490 VALVE
-1 VALVE SPRING
706-86~/ VALVE ASS`Y
235-61-121-2 BRAKE VALVE
706-86-53430 VALVE
235-61-12210 VALVE
208-62-66610 VALVE
-1 AIR VALVE
706-87-55713 BRAKE VALVE ASS
235-61-128-1 VALVE ASS`Y
706-8J–1 CHECK VALVE
707-71-75520 VALVE
235-61-14320 VALVE
208-62-71201 VALVE ASS`Y
-1 VALVE
707-79-9-2 CHECK VALVE
707-83-1571 VALVE
235-61-155-1 VACUATOR VALVE
707-83-10140 VALVE
235-61-16201 VALVE ASS`Y
208-936-2571 VALVE
-1 VALVE ASS`Y
707-83-15710 VALVE
235-61-167-1 CONTROL VALVE
707-83-111-1 VALVE KIT
707-88-10302 VALVE ASS`Y
235-61-416-1 VALVE KIT
707-88-10450 VALVE
235-832-1261 CHECK VALVE
208-979-5130 VALVE
-1 CONTROL VALVE A
708-1H-57151 VALVE ASS`Y
235-A40-51-1 DEMAND VALVE
708-1H-57180 VALVE ASS`Y
235-A44-1130 VALVE
209-60–1 VALVE BODY
708-1H-03310 VALVE ASS`Y
235-A44-1180 VALVE
209-60-12110 VALVE
-1 VALVE
708-1L-03411 SERVO VALVE ASS
235-A44-1350 VALVE
209-60-12150 VALVE
-1 VALVE
708-1L-03610 VALVE ASS`Y
235-A60-2301 VALVE
209-60-12220 VALVE
-1 CHECK VALVE
708-1L-5712 RELIEF VALVE AS
235-A60-5110 VALVE ASS`Y
209-60-12301 VALVE ASS`Y
-1 CHECK VALVE
708-1L-04622 VALVE ASS`Y
235-A61-51-1 VALVE ASS`Y
708-1L- 0571 1 VALVE ASS`Y
235-A61-58-1 VALVE ASS`Y
708-1L-5712 VALVE ASS`Y
236-41-121-1 CONTROL VALVE A
708-1L- 0571 0 VALVE ASS`Y
236-60–1 TREADLE VALVE
708-1S-03423 VALVE ASS`Y
236-60-23610 VALVE
205-60-17140 VALVE
-1 VALVE
708-1S-5711 VALVE
236-60-24610 VALVE
205-60-21601 VALVE ASS`Y
-1 VALVE
708-1S-5710 VALVE
236-60-262-1 VALVE SEAT
708-1T-5711 VALVE
236-60-263-1 VALVE
708-1T-5711 VALVE ASS`Y
236-60-26410 VALVE
205-60-66110 VALVE
380-89 0571 -1 VALVE ASS`Y
708-1T-5711 VALVE ASS`Y
237-40-12120 VALVE ASS`Y
205-917-2460 VALVE
380-N11211-1 CONTROL VALVE
708-17-5710 SERVO VALVE ASS
237-61-0571 VALVE ASS`Y
205-970-82-1 VALVE XIHU (WEST LAKE) DIS.
708-1W-03870 VALVE
238-15–2 VALVE
708-1W- 0571 0 VALVE ASS`Y
238-40-122-1 VALVE
708-1W-04631 SERVO VALVE
238-40-13260 VALVE
702-77-11422 VALVE
381-68-1 VALVE SEAT
708-21-07820 SERVO VALVE
242-60-511-1 VALVE
708-21-5711 VALVE ASS`Y
244-61-51311 VALVE
705-12-11805 VALVE ASS`Y
-7 CONTROL VALVE
708-21-08212 SERVO VALVE ASS
245-27-12240 VALVE
706-16-75301 VALVE ASS`Y
-1 VALVE ASS`Y
708-21-09212 SERVO VALVE ASS
245-29-51140 VALVE ASS`Y
706-46-52301 VALVE
-2 SOLENOID VALVE
708-21-152-1 CONTROL VALVE
708-21-16901 SERVO VALVE
2501-44–3 VALVE
708-21-172-3 CONTROL VALVE A
708-23-04611 SERVO VALVE ASS
2501-73-1270 VALVE
706-46-57401 SERVO VALVE ASS
-1 CHECK VALVE
708-23-07211 SERVO VALVE ASS
2501-76-1380 VALVE
706-46-7-2 CONTROL VALVE
708-23-07611 VALVE ASS`Y
256-15–1 VALVE
708-23-07870 VALVE ASS`Y
257-20-17550 VALVE
706-47-62-1 CONTROL VALVE
708-23-5710 SERVO VALVE
257-81-12310 VALVE
706-66-51101 REGULATOR VALVE
-1 AIR VALVE ASS`Y
708-23-146-2 STEERING VALVE
708-23-268-1 VALVE
708-25-5710 RELIEF VALVE
258-80-34640 VALVE
706-73-718-2 TREADLE VALVE
708-25-04613 VALVE ASS`Y
232-40-579-2 VALVE
708-25- 0571 1 VALVE ASS`Y
232-41-251-1 STEERING VALVE
708-25-06850 VALVE ASS`Y
232-44-11110 VALVE
706-73-72370 VALVE
-1 TREADLE VALVE A
708-25- 0571 0 SERVO VALVE ASS
232-44-24710 VALVE BODY
706-73-726-2 VALVE KIT
708-25- 0571 1 SERVO VALVE ASS
232-44-51310 VALVE
706-73-727-1 TREADLE VALVE A
708-25-07211 SERVO VALVE ASS
232-60–1 VACUATOR VALVE
708-25-571 SERVO VALVE ASS
232-60–1 CHECK VALVE
708-25-07251 SERVO VALVE ASS
232-60–1 CONTROL VALVE A
708-25-07270 SERVO VALVE ASS
232-60–2 VALVE
708-25-07490 SERVO VALVE ASS
232-60–1 VALVE ASS`Y
708-25-5710 VALVE ASS`Y
232-60–1 STEERING VALVE
708-25-571 VALVE ASS`Y
232-60–1 VALVE
708-25-07651 VALVE ASS`Y
232-60-5711 VALVE ASS`Y
706-73-858-2 VALVE
708-25-5710 SERVO VALVE ASS
232-60-0571 VALVE ASS`Y
706-75-019-3 DEMAND VALVE
708-25-5710 VALVE ASS`Y
232-60–1 STEERING VALVE
708-25- 0571 0 SERVO VALVE
232-60–1 VALVE KIT
708-25-08460 SERVO VALVE
232-60-12-1 SOLENOID VALVE
708-25-08620 VALVE ASS`Y
232-60-12150 VALVE
706-75-71-2 VALVE
708-25-5710 SERVO VALVE ASS
232-60-16306 CHECK VALVE
706-75-71104 BRAKE VALVE ASS
-1 CONTROL VALVE
708-25-09220 SERVO VALVE ASS
232-60-16331 CHECK VALVE
706-75-713-1 CONTROL VALVE A
708-25-09232 SERVO VALVE
232-60-16341 VALVE
706-75-71403 BRAKE VALVE ASS
-2 VALVE ASS`Y
708-25-09290 VALVE
232-60-16381 VALVE
706-75-72101 BRAKE VALVE
-1 VALVE BODY
708-25-5710 VALVE
232-60-16404 CHECK VALVE
706-75-72111 VALVE BODY
277-60-13102 VALVE ASS`Y
708-25-5711 VALVE ASS`Y
232-60-165 CHECK VALVE
706-77-71405 BRAKE VALVE
281-64-14401 VALVE
723-11-01660 VALVE ASS`Y
23S-P32-1102 CONTROL VALVE
706-77-71450 VALVE
281-64-15 VALVE
723-18-12909 CONTROL VALVE A
232-60–01 VALVE
723-1A-118-01 VALVE
723-1A-119-02 CHECK VALVE ASS
723-1A-1190A VALVE ASS`Y
233-60-16471 VALVE
723-41-072-03 VALVE
723-1A-122-02 VALVE
723-1A-12302 CONTROL VALVE
233-61-0571 VALVE ASS`Y
723-43-111-01 VALVE
723-1A-12702 CONTROL VALVE
233-61–01 VALVE
723-1A-132-01 VALVE
723-1A-135-01 VALVE
723-1A-13603 VALVE ASS`Y
23S-P03-1710 VALVE ASS`Y
723-46-15713 VALVE ASS`Y
–51 VALVE
723-1A-13701 VALVE ASS`Y
23S-P32-1101 CONTROL VALVE
723-46-10302 VALVE ASS`Y
22-55719-01 VALVE
723-1A-13706 VALVE ASS`Y
23W-26-21220 VALVE COVER ASS
723-46-10502 VALVE ASS`Y
22-5-01 VALVE
723-1A-13804 CONTROL VALVE A
23W-60-219-01 BRAKE VALVE ASS
723-1A-13903 VALVE ASS`Y
23W-60-23120 VALVE
723-46-13303 VALVE ASS`Y
22-5-02 VALVE
723-1A-151-01 VALVE
723-1A-15402 CONTROL VALVE
23W-60-26101 CONTROL VALVE
723-46-13701 VALVE ASS`Y
-01 VALVE
723-1A-15505 CONTROL VALVE
23W-60-26510 VALVE ASS`Y
723-46-14104 VALVE ASS`Y
-00 VALVE ASS`Y
723-1A-15605 CONTROL VALVE
23W-60-26531 VALVE ASS`Y
FAQ
Q1:You are a trader or manufacturer .
We are a trader .
Q2: How about the payment terms ?
We usually accept T/T . Other terms also could be negotiated .
Q3: Warranty
3-6 months warranty. If any parts break during the warranty, Just offer us the proof . We’ll send you a new 1 !
Q5:If parts be lost during delivery , how solve ?
We’ll resend the parts free of charge .
| After-sales Service: | 1 Year |
|---|---|
| Warranty: | 6 Months |
| Type: | Crawler |
| Application: | Bulldozer & Excavator |
| Certification: | ISO9001: 2000 |
| Condition: | New |
| Samples: |
US$ 300/Piece
1 Piece(Min.Order) | |
|---|
What is a Gearbox and How Does It Work?
A gearbox is a mechanical device that transmits power and changes the speed or torque of a rotating input shaft to a different output shaft. It is commonly used in various machines and equipment to control the speed and direction of motion.
Here’s how a gearbox works:
- Input Shaft: The gearbox receives rotational energy from an input shaft connected to a power source, such as an electric motor or an engine.
- Gears: Inside the gearbox are a set of gears with different sizes. These gears mesh with each other, and their arrangement determines the gear ratio, which defines how many revolutions the output shaft will make for a given rotation of the input shaft.
- Output Shaft: The output shaft is connected to the machinery or equipment that needs to be powered. As the gears rotate, the motion and power are transmitted from the input shaft to the output shaft.
- Gear Ratio: By selecting different gear combinations, the gearbox can change the speed and torque of the output shaft. A higher gear ratio results in higher torque and lower speed, while a lower gear ratio provides higher speed and lower torque.
Gearboxes play a crucial role in various applications, including automobiles, industrial machinery, robotics, and more, enabling efficient power transmission and speed control.
editor by CX 2023-10-06