Product Description
Gear box PWD2100 PWD3150 PWD3200 PWD3300 PWD3500 PWD3700 Hydraulic CHINAMFG Spicer CHINAMFG Winch Drive Gearbox
They feature 2 close-mounted flanges, 1 of which is attached to the winch frame and the other of which is fixed to the cable drum. The drive housing therefore acts as the main
drum mounting.
The drum must also be held by a suitable mounting or support on the opposite side.
With these units, CHINAMFG offers winch manufacturers a standard product that can be adapted to all drum dimensions and lifting specifications.
The drive and drum supports must be machined and finished in conformity to the specifications given in this catalogue.
All gear units are equipped with a hydraulically operated, multdisc, negative lamellar brake.
Performance figures given in this catalogue refer to FEM standards and in particular to class M5 (T5-L2) for output speeds of 15 rpm.
This is the most common classification for the mobile crane and on-board winch markets.
DANA leads the field in performance calculation and verification, and uses powerful software (BreCalc) that can also verify gear units in conformity to other standards and any specific operational situation.
DANA holds a Type Approval Certificate from Det Norske Veritas for PWD, SLW and SMW product families, and can therefore carry out certification in the shortest of times.
Gearbox CTU3150 CTU3200 CTU3300 CTU3500 CTU3700 CTU3850 CTU31100 CTU power transmission CHINAMFG Riduttori track drive
Gearbox CTU3150.1 CTU3200.1 CTU3300.1 CTU3500.1 CTU3700.1 CTU3850 CTU31100 CTU31400 CTU31700 CTU power transmission CHINAMFG Riduttori track drive Planetary Travel Drive Reducer CTD CTU R1 FR RSF RFL RFD RX CWD CHINAMFG Final Drive.
Brevini Riduttori power transmission compact planetary track drive are specifically designed for tracked vehicles: excavators and earth-moving machines.
They have a heavy-duty casing, a short overall length, and great radial and axial load capacity.
They have an integral multidisc failsafe brake and can be installed directly on hydraulic motors and are ready to accept plug-in hydraulic motors.
The compact design of the unit allows the power conveyance from CHINAMFG axial piston hydraulic motor directly to the operating machine, reducing the overall dimension of the hydrostatic transmission.
High radial load capacity bearings, dedicated sealing system and manual disengagement allow the final drive to operate in severe and heavy-duty conditions.
Internal multidisc parking brake, motion control valves and smooth displacement variability given from the CHINAMFG hydraulic motor are additional benefits that makes CHINAMFG as One Partner able to supply complete, reliable and integrated transmission package.
Main features
– Internal multidisc parking brake
– Manual disengagement device for towing
– High radial and axial load capacity bearings
– Cartridge hydraulic motors for compact layouts
– Motion control valves with different options available
– Bevel gear unit at the input for electric motor and/or cardan shaft connection available
– Special sealing system designed for severe environmental conditions
– Hub and spindle made of high strength material
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Type: | Planetary Gear Reducer |
| Brand: | Brevini Riduttori |
| Transport Package: | Plywood Case |
| Customization: |
Available
| Customized Request |
|---|
Is it Better to Repair or Replace a Damaged Gearbox?
Deciding whether to repair or replace a damaged gearbox depends on several factors and considerations:
- Extent of Damage: Assess the severity of the gearbox damage. Minor issues like worn bearings or seals may be repairable, while extensive damage may necessitate a replacement.
- Cost of Repair: Compare the cost of repairing the gearbox to the cost of replacing it with a new or remanufactured unit. In some cases, repairs might be more cost-effective.
- Availability of Parts: Availability of replacement parts for the gearbox can influence the repair option. If parts are hard to find, replacement might be a more viable choice.
- Age and Condition: Consider the age and overall condition of the vehicle. If the vehicle is older and nearing the end of its lifespan, a replacement gearbox might offer better long-term reliability.
- Performance and Efficiency: A new or remanufactured gearbox might offer improved performance and efficiency compared to a repaired one.
- Future Maintenance: Evaluate potential future maintenance needs of both repair and replacement options. A replacement gearbox might come with a warranty and require less frequent maintenance.
- Professional Assessment: Seek advice from a qualified mechanic or technician who can thoroughly assess the gearbox and provide recommendations based on expertise.
Ultimately, the decision to repair or replace a damaged gearbox should be based on a careful evaluation of these factors. It’s recommended to consult with professionals to make an informed choice that best suits your specific situation and budget.
editor by CX 2023-09-18
China best Robotics Winch Worm Gear Gearbox Nmrv150 with Best Sales
Solution Description
Robotics Winch Worm Equipment Gearbox NMRV150
With your distinct requirements of Flange, Ratio, Shaft,and so on, we can recommend the ideal
Wrom Gearbox for you.
We source all varieties of Worm Gearbox with personal manufacturing unit for far more than 15 many years.
Make contact with us to get much more specifics and manufacturing facility value with quite excellent high quality products.
Item Specification:
| Product | Worm Gearbox |
| Variety | NMRV / NRV |
| Model | NMRV/NRV twenty five/30/40/50/63/75/90/a hundred and ten/130/150/185 |
| Reduction Ratio | five,7.5,ten,15,20,twenty five,30,forty,50,sixty,80,a hundred |
| Flange | FA / FL or as per your requires |
| Matching Motor | .06KW~15KW |
| Content | Die-casting Aluminum Alloy |
| Color | Blue /Silver Grey /Customized |
| Flange Standard | PAM / IEC |
| Components | Shaft, Flange, Torque arm, etc |
| Lubricant | Synthetic Oil or Worm Equipment Oil |
| Use | Equipment of foods stuff, ceramics, chemical, packing, dyeing, wooden operating, glass industries, and so on |
| Note: 1) you should select from over requirements. 2) If over options can not meet your calls for, remember to send out us your requirements(ratio, flange, mounting, application, or a photograph of your old one), we will recommond you a suitable type. |
|
Item Parameters:
|
Versions |
Rated Energy |
Rated Ratio |
Enter Hole Dia. |
Enter Shaft Dia. |
Output Gap Dia. |
Output Shaft Dia. |
|
NMRV571 |
.06KW~.12KW |
five~60 |
Φ9 |
Φ9 |
Φ11 |
Φ11 |
|
NMRV030 |
.06KW~.25KW |
five~eighty |
Φ9(Φ11) |
Φ9 |
Φ14 |
Φ14 |
|
NMRV040 |
.09KW~.55KW |
five~one hundred |
Φ9(Φ11,Φ14) |
Φ11 |
Φ18(Φ19) |
Φ18 |
|
NMRV050 |
.12KW~1.5KW |
five~100 |
Φ11(Φ14,Φ19) |
Φ14 |
Φ25(Φ24) |
Φ25 |
|
NMRV063 |
.18KW~2.2KW |
7.5~a hundred |
Φ14(Φ19,Φ24) |
Φ19 |
Φ25(Φ28) |
Φ25 |
|
NMRV075 |
.25KW~4.0KW |
7.5~one hundred |
Φ14(Φ19,Φ24,Φ28) |
Φ24 |
Φ28(Φ35) |
Φ28 |
|
NMRV090 |
.37KW~4.0KW |
7.5~100 |
Φ19(Φ24,Φ28) |
Φ24 |
Φ35(Φ38) |
Φ35 |
|
NMRV110 |
.55KW~7.5KW |
seven.5~100 |
Φ19(Φ24,Φ28,Φ38) |
Φ28 |
Φ42 |
Φ42 |
|
NMRV130 |
.75KW~7.5KW |
7.5~one hundred |
Φ24(Φ28,Φ38) |
Φ30 |
Φ45 |
Φ45 |
|
NMRV150 |
two.2KW~15KW |
7.5~a hundred |
Φ28(Φ38,Φ42) |
Φ35 |
Φ50 |
Φ50 |
Detailed Photographs:
Thorough Drawing will be verified with you prior to buy!
Apps:
Business Profile:
Lunyee Industries Improvement Co., Ltd. is a leading producer for manufacturing facility automation (FA) products,
we concentrate on electrical power transmission and movement control solutions!
Our main creation are electrical power transmission merchandise like AC and DC(brush/brushless) equipment motor, stepper motor,
high precision planetary gearbox (spur/helical equipment) for stepping motor and many others.
-WE Target ON Consumer Fulfillment!
All CZPT folks are focused in buyer pleasure! We serve our consumer by high good quality, lower value, fast delivery
and fast response on after revenue support!
No subject the items are produced by CZPT or our sub-contractors, a guarantee for top quality is offered from us!
Lunyee use the newest gear for production and take a look at!
Manufacturing facility:
Exhibition:
Certifications:
Our motors handed CE Certification, with high quality which has been recognized for all buyers.
Packaging and Cargo:
Feedbacks:
FAQ:
Q: Are you buying and selling firm or company?
A: We are the motor manufaturer for 15 a long time in China.
Q: How to get?
A: ship us inquiry → get our quotation → negotiate specifics → validate the sample → indication deal/deposit →
mass production →cargo prepared → stability/delivery → additional cooperation
Q: How about Sample get?
A: Sample is obtainable for you. please contact us for specifics.
Q: Which delivery way is obtainable?
A: DHL, FedEx, By Sea are obtainable. The other delivery techniques are also accessible, make sure you make contact with us if you need ship
by the other transport way.
Q: How long is the deliver, generating and shipping?
A: Produce time is dependent on the amount you order. generally it will take 7-twenty five doing work times.
Q: How to verify the payment?
A: We settle for payment by T/T, PayPal, the other payment methods also could be recognized, Please get in touch with us before you
pay by the other payment techniques. Also 50% deposit is obtainable, the balance money must be paid just before shipping.
Rated Merchandise:
The expression “gearbox” is utilized to refer to any unit that connects a motor to a device and consists of a series of gears, also known as a equipment set. It gets the principal enter pace from the motor and modifications it to a diverse output pace employing its gears. Different kinds and combinations of gears provide certain reasons. The sorts of gears located in gearboxes incorporate spur gears, bevel gears, helical gears, helical gears and worm gears. The performance performance of a gearbox is represented by the gearbox ratio, which is the ratio of the velocity of the input source to the pace of the output source
Underneath is a record of our at the moment accessible industrial gearboxes. If you can not find what you are looking for, make sure you speak to the manufacturing facility for much more alternatives. At EP, we are constantly developing new items and retrofitting old kinds to meet consumer requirements.
